metal çalışma makineleri / diğer metal çalışma makineleri
Üretici: DMG MORI
model:DMF 300|11
İlan No.: 169843717
miktar: 1
tarih: 10.07.2026
fiyat:
Seller-item-No.:030346
| General | |
| Travelling column machine; Control: CELOS with Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 3000 mm |
| Cross | 1100 mm |
| Vertical | 1050 mm |
| Feed drives: | |
| Feed rate X / Y / Z | 42000/42000/42000 mm/min |
| Rapid feed X / Y / Z | 42/42/42 m/min |
| NC-swivel head (B-axis) | Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ft |
| Dynamic package for DMF 300|11 linear | Dynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motor |
| Toolchanger with twin-gripper | toolchanger with twin-gripper |
| Type of magazine Chain | |
| Number of tools 40 | |
| Cabine | Full protection cabin |
| Package Mill / Turn 20,000 rpm, HSK-A63 | Package Mill / Turn, 20,000 rpm HSK-A63 (Only available for Siemens 840D solutionline) NC-Mill-Turn-table d 1,050 mm / 41.3 in (left) C-axis direct drive, speed max. 700 rpm Integrated balancing system Milling spindle power 35/25 kW (40/100% ED) tool hold |
| Removable partition wall DMF |11 | Partition wall removable for pendulum machining, 2 working spaces |
| Tool magazine 90 places | Tool magazine 90 places SK40/HSK-A63 Chain type with double gripper |
| Coolant tempering for internal coolant 980l | Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l) |
| Oil mist separator (with partition wall) | Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h |
| Combi-Tool measuring | Combi - Tool measuring Blum LaserControl LC52 DIGILOG Laser-System for milling tools 3D-probe for turning tools |
| 3D quickSET elevated constructuion | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe) |
| Minimum lubrication external | Minimum lubrication external for vertical or swivel head |
| Double cartridge filter,25 µm | Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant) |
| Inner coolant supply 40Bar/980l | Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle |
| Sensor package i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Infrared measuring probe PP 600 optical | Infrared touch Probe type Renishaw PP600 optical (OMP600) |
| Door drive for working area doors | Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents |
| Stop block Speedmaster | Stop block HSK-A63/SK40/CAT40 for Speedmaster spindle |
| Package for tropical climate (dynamic vers.) | Package for tropical climate DMF(dynamic vers.) for ambient temperature max.50° Celsius: including reinforced active cooling for motor spindle and Linear motor temperature control for hydraulic oil |
| ATC (Application Tuning Cycle) | ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| Working plain transformation | working plain transformation (requirement option electronic angle indication for rotary table) |
| 2017 | DMG MORI | DMF 260/11 linear | |
| 2004 | DMG MORI | DMF 250 | |
| 2001 | DMG MORI | DMF 220 | |
| 2022 | DMG MORI | DMF 260 | 11 | |
| 2011 | DMG MORI | DMF 260 | |
| DMG MORI | DMF 180|7 | ||
| DMG MORI | DMF 200|8 | ||
| 2017 | DMG MORI | WASINO G 100 | 300 | |
| 2020 | DMG MORI | NLX3000Y/3000 |
| 2005 | DMG MORI | DMF 360 LINEAR | 65000 EUR | [Jun 2025] |
